Tourné Pièces Traitement Étapes

1 Strictement utilisation protection équipement conformé à les réglementations avant travail, attache up les poignets, do not us foulards ou gants, et femmes travailleurs devraient porter leur cheveux sous le chapeau. Le opérateur doit se tenir debout sur le pied pédale.
2 les boulons, voyage limites, signaux, sécurité protection (assurance) dispositifs, mécanique transmission pièces, électriques pièces, et lubrification points de chaque pièce devrait être strictement inspecté, et ils peuvent seulement être démarrés après ils sont confirmés à être fiables.
3 The safety voltage and voltage of various machine tool lighting applications shall not exceed 36 volts.
in opération
1 Workers, clips, tools and workpieces must be firmly clamped. All kinds of machine tools should be idling at low speed after starting up, and can only be officially operated after everything is normal.
2 It is forbidden to place tools and other things on the track surface of the machine tool or on the workbench. It is not allowed to remove iron filings by hand, and special tools should be used for cleaning.
3 Observe the surrounding dynamics before starting the machine tool. After starting the machine tool, stand in a safe position to avoid the moving parts of the machine tool and the splashing of iron filings.
4 pendant la opération de divers types de machine outils, it is not allowed to adjust the speed change mechanism or stroke, and it is not allowed to touch the working surface of the transmission part, the workpiece in motion, the cutting tool, etc. during processing, and it is not allowed to measure any size during operation. Partiellement passing or taking items such as tools.
5 Quand anormal bruit is trouvé, stop the machine immédiatement for maintenance, do not run forcibly or with a disease, and the machine tool is not allowed to be used with overload.
6 pendant le traitement de chaque machine pièce, strictement implement the process discipline, see the drawings clearly, see the control points of each part, the rugosseness and the technical requirements of the relevant parts, and determine the production process of the parts.
7 Stop the machine when adjusting the machine speed, stroke, clamping the workpiece and cutting tools, and wiping the machine. It is not allowed to leave the work station when the machine tool is running. When leave for some reason, you must stop the machine and cut off the power supply.